自动晾茬机是将摊晾、加浆、加曲、拌和、卸料等工序一次性完成，本机装有多个轴流风机，经过风量的调整，使高温凉茬在运送过程中降到规定的温度，摊晾作用好。

The fully automatic stubble drying machine completes the processes of spreading, adding slurry, adding starter, mixing, and unloading in one go. This machine is equipped with multiple axial flow fans, and the air volume is adjusted to lower the high-temperature cool stubble to the specified temperature during transportation, which has a good spreading effect.

在摊晾过程中设置多个拌和设备，使晾茬在摊晾过程中松散、不易结坨，加浆、下曲均匀，数量可调整，经过设备可将浆水、曲粉、粮茬拌和均匀。

Multiple mixing devices are set up during the air spreading process to make the air stubble loose and less prone to clumping. The addition of slurry and downward bending are uniform, and the quantity can be adjusted. Through the equipment, the slurry, yeast powder, and grain stubble can be mixed evenly.

工人把出锅用后的荐子铲入该机后，主动加油、加水温度适宜、主动卸料，晾茬网带漏掉的荐子直接落入本机规划的不锈钢箱体内，整理后完全卧池利，整理简便杜绝了浪费与环境污染现象。

After the workers shovel the recommended material from the pot into the machine, they actively add oil and water to the appropriate temperature, and actively discharge the material. The missed recommended material from the drying mesh belt directly falls into the planned stainless steel box of the machine. After sorting, it is completely lying in the pool and easy to organize, eliminating waste and environmental pollution.

安装前，车间地面不需任何准备作业。还可根据需要，移动运用。与传统工艺比较，大大下降劳动强度，缩短了时刻，并且整机配用动力小、作业时刻短、节约能源、凉荐作用更佳，完成机械主动化。

Before installation, there is no need for any preparation work on the workshop floor. It can also be used on the move as needed. Compared with traditional processes, it greatly reduces labor intensity, shortens time, and the whole machine is equipped with less power, shorter working hours, saves energy, and has better cooling effect, completing mechanical automation.

凉茬机的结构组成：

The structural composition of the stubble cooling machine:

1.主要由机架、风机、传送带和顺次衔接于传送带上的搅笼、打料棍、翻料棍、下料设备、出料管组成.

1. It is mainly composed of a frame, a fan, a conveyor belt, and a stirring cage, a feeding rod, a flipping rod, a feeding equipment, and a discharge pipe that are sequentially connected to the conveyor belt

2.风机固定在传送带侧端的机架上并少设置为三台，所述的下料设备由下料斗和固接于下料斗下部的下料辊组成，所述的机架上设有高于传送带运送线两边的挡板。

2. The fan is fixed on a frame at the side end of the conveyor belt and is equipped with at least three sets. The feeding equipment consists of a feeding hopper and a feeding roller fixedly connected to the lower part of the feeding hopper. The frame is equipped with baffles higher than both sides of the conveyor belt conveyor line.

3.运用时，酒茬在传送带上经过，在打碎和拌和的一起风机作业，敏捷降温，冷却后的酒茬在下料设备中与酒曲主动混合均匀。

3. When in use, the stubble passes through the conveyor belt and operates with a fan during crushing and mixing, quickly cooling down. The cooled stubble is actively mixed with the koji in the cutting equipment.

4.提高了冷却作用、下降了功耗，处理了现有设备自积阻塞现象，并完成了酒茬和酒曲的主动混合。

4. The cooling effect has been improved, power consumption has been reduced, existing equipment self accumulation blockage phenomenon has been dealt with, and the active mixing of wine stubble and wine yeast has been completed.

自动凉茬机作业工序及结构组成相关事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.qfrtrq.com咨询！

That's all for the explanation of the operation process and structural composition of the automatic stubble cooling machine. I hope it can be helpful to you. For more information, please come to our website http://www.qfrtrq.com consulting service