As for the horse drawn cart solid wood wine barrel, I believe we all know that the carvings of horse drawn cart are lifelike and bring us a strong visual art effect. Then some people are curious. How should this be carved? What are the steps? Is it complicated? Rentai's editor will introduce you

一：先将取下来的木材劈成木片，在使用钢锯切割的时候，多会破坏掉木头本身的年轮和纤维，所以在步的制造过程中必须是用人工斧劈，才能将橡木桶制造好。

1： First, cut the wood into pieces. When cutting with a hacksaw, it will destroy the growth rings and fibers of the wood itself. Therefore, in the first step of the manufacturing process, it is necessary to use an artificial axe to make a good oak barrel.

二：时间较长，对木材进行干燥处理。橡木片在制做前必须置于室外，这个过程主要为了增加橡木的防水性，还可以对单宁的涩味进行弱化。

2： For a long time, the wood should be dried. Oak chips must be placed outdoors before making. This process is mainly to increase the water resistance of oak and weaken the astringency of tannin.

三：把橡木片组合起来。把已经干燥的橡木，裁成中间宽，两端小的木片，一般在制作一个桶的时候需要32块橡木片，并且用铁条对橡木进行固定。

3： Put the oak pieces together. Cut the oak that has been dried into pieces that are wide in the middle and small at both ends. Generally, when making a barrel, 32 pieces of oak pieces are needed and fixed with iron bars.

四：关重要的一步，对像木桶加热和熏烤。通过加热橡木这种方法可以让橡木留下烟熏的味道，这会使浸泡的葡萄酒拥有杏仁、面包的香味。

4： A crucial step is to heat and fumigate like a cask. By heating the oak, the oak leaves a smoky flavor, which gives the soaked wine the flavor of almond and bread.

五：将橡木桶盖上盖子进行密封检验，检测合格之后便可以把橡木桶进行艺术加工处理，投入到市场当中。

5： Cover the oak barrel for sealing inspection. After passing the inspection, the oak barrel can be processed and put into the market.

六：是雕、刻、塑三种创制方法的总称。指用各种可塑材料（如石膏、树脂、粘土等）或可雕、可刻的硬质材料（如木材、石头、金属、玉块、玛瑙等），创造出具有一定空间的可视、可触的艺术形象。

6： It is the general term of carving, carving and molding. It refers to the use of various plastic materials (such as gypsum, resin, clay, etc.) or hard materials (such as wood, stone, metal, jade, agate, etc.) that can be carved or carved to create a visual and touchable artistic image with a certain space.

七：印版呈网状、版面形成通孔和不通孔两部分，印刷时油墨在刮墨版的挤压下从版面通孔部分漏印在承印物上。

7： The printing plate is reticulated, and the plate forms through-hole and through-hole parts. When printing, the ink is squeezed by the scraping plate to leak from the through-hole part of the plate on the substrate.

以上就是不锈钢内胆实木酒桶上的雕刻工序以及制作的步骤的相关介绍，希望上面的内容能够给大家带来一定的帮助。

The above is the stainless steel liner solid wood barrel carving process and production steps related to the introduction, I hope the above content can bring you some help.