Seeing a lot of beautiful, tall wooden barrels, I really have to marvel at human creativity. After tasting delicious wine, I have an unspeakable love for wooden wine barrels. By chance, my friend actually took me to see the production factory of wooden wine barrel, and strolled around. The original tall wooden wine barrel was produced in this way.

这类的高大上的木酒桶，很受大多人的！它的生产过程，是怎样的呢？看看如下操作：

This kind of tall wooden cask, very popular with most people! What is its production process? Take a look at the following operations:

高大上实木酒桶生产过程

Production process of tall solid wood wine barrel

一、木材的选用及处理，这些要根据客人的具体要求来的，太的知识及操作要具体问题具体说了。这里略过......

1、 Selection and treatment of wood, these should be based on the specific requirements of the guests, too professional knowledge and operation to specific problems. Forget about

高大上实木酒桶生产过程

Production process of tall solid wood wine barrel

二、将要生产的材料，用数控带锯开料，平板的材料，开出弯弧度的料。率，高品质的生产，很重要哦。高大上的木酒桶开料这步很重要，不一样的尺寸，直接影响组装后整个桶的质量及外观了。

2、 Materials to be produced, with CNC band saw material, flat material, out of the curvature of the material. High efficiency and high quality production is very important. This step is very important for large wooden wine barrels. Different sizes will directly affect the quality and appearance of the whole barrel after assembly.

高大上实木酒桶生产过程

Production process of tall solid wood wine barrel

三、开好后的料，还要再加，在两头相应的位置挖出榫位置来。如图中凹下去的位置。

3、 After the opening of the material, but also to add, in the two ends of the corresponding position to dig out the tenon position. This is the concave position in the figure.

高大上实木酒桶生产过程

Production process of tall solid wood wine barrel

四、挖好榫后，组装工作开始了。一块块弧形料排好队，用支持小木条固牢，一个个半圆就加工成了。

4、 After digging the tenon, the assembly work began. A piece of arc-shaped material is arranged in a line and fixed with small supporting sticks. The semicircles are processed.

高大上实木酒桶生产过程

Production process of tall solid wood wine barrel

五、半圆后的木桶，进入打磨工序。打磨内圆—合低—打磨外圆。箍桶，桶箍现在市场一般选用的是镀锌的钢皮与不锈钢皮，材料的厚度在3mm。

5、 After the barrel is semicircular, enter the grinding process. Grinding inner circle - closing low - grinding outer circle. Finally, the hoop and hoop are generally made of galvanized steel and stainless steel with a thickness of 3mm.

六、木桶的成败进入的工作了，防腐，防水处理，精打磨，油漆，一系列的工作完成后，漂亮的、高大上的木酒桶就可以打包出货了。

6、 The success or failure of the cask entered the final work, anticorrosion, waterproof treatment, polishing, painting, after a series of work, beautiful, tall wooden wine barrels can be packed and shipped.