全自动晾茬机是一种新型酿酒设备，具有速度快，效率高等特点。可自动加水、下曲、出料、搅拌均匀、散冷效果及其理想。每台凉茬机都有接曲装置组成，接曲装置是凉茬机比较重要的装置之一。接曲装置位于凉茬机的底部，形成对下料口漏料的收集作用，从而节约物料，避免出现浪费的现象。

The fully automatic stubble drying machine is a new type of brewing equipment with the characteristics of fast speed and high efficiency. It can automatically add water, lower the curve, discharge the material, stir evenly, and achieve ideal cooling effect. Each cooling machine is composed of a bending device, which is one of the important devices of the cooling machine. The bending device is located at the bottom of the cooling stubble machine, forming a collection effect on the material leakage at the discharge port, thereby saving materials and avoiding waste.

　　1、在地上凉茬机的加曲料斗下料口正下方、处于凉茬机底部的传动链条上方设置一接曲筐；

1. Install a curved basket directly below the discharge port of the curved material hopper of the ground cooling machine and above the transmission chain at the bottom of the cooling machine;

　　2、接曲筐的两端分别固定在凉茬机支架的横梁上；

2. The two ends of the connecting basket are respectively fixed on the crossbeam of the cooling machine bracket;

　　3、接曲筐为一端抬起的折型护板；

3. The bending basket is a folded protective plate that is lifted at one end;

　　4、且折型护板的抬起端设有调节螺栓用于调节接曲筐在横梁上的折型高度；

4. The lifting end of the folding protective plate is equipped with an adjusting bolt to adjust the folding height of the connecting basket on the crossbeam;

　　5、以接曲筐形成对加曲料斗下料口中漏料的收集结构。

5. To form a collection structure for material leakage in the discharge port of the feeding hopper by connecting the curved basket.

　　全自动晾茬机与原始的打茬机相比，优势更明显，自动凉茬机是在原打茬机的基础上研制出来的，原打茬机凉茬需要40-50分钟，经过升级后的自动凉茬机仅需要20分钟左右，大大缩短了时间，提高了效率，缩短了工作时间。

Compared with the original stubble cutting machine, the fully automatic stubble drying machine has more obvious advantages. The automatic stubble cooling machine is developed based on the original stubble cutting machine. The original stubble cutting machine takes 40-50 minutes to cool the stubble, while the upgraded automatic stubble cutting machine only takes about 20 minutes, greatly reducing time, improving efficiency, and shortening working time.

　　使用全自动晾茬机，凉茬网带漏掉的茬子直接落入本机设计的不锈钢箱体内，清理后完卧池利用，清理简便杜绝了浪费与污染环境现象。安装前，车间地面不需任何准备工作。还可根据需要，移动使用。

By using a fully automatic stubble drying machine, the leftover stubble from the cool stubble mesh belt can directly fall into the stainless steel box designed by this machine. After cleaning, it can be used in a horizontal pool, making cleaning simple and eliminating waste and environmental pollution. Before installation, the workshop floor does not require any preparation work. It can also be moved and used as needed.

　　此外我们在启动全自动晾茬机之前，我们应当先检查机器的电机是否正常，再去启动设备。在检查时，应同时使用吹风机对电机内的灰尘等污垢杂物清理干净，还要测量接线是否合格，如果发现电机出现机械损伤或者火花灼痕应当立即进行必要的处理工作。

In addition, before starting the fully automatic stubble drying machine, we should first check whether the motor of the machine is normal before starting the equipment. During the inspection, a hair dryer should be used to clean the dust and other debris inside the motor, and the wiring should also be measured to ensure compliance. If mechanical damage or spark marks are found on the motor, necessary treatment work should be carried out immediately.

本文由 全自动凉茬机 为您精心提供，如想了解更多请点击我们的网站：http://www.qfrtrq.com，我们将会以的热情为您解答!

This article is carefully provided by the fully automatic stubble cooler. If you want to learn more, please click on our website: http://www.qfrtrq.com We will answer you with the greatest enthusiasm!